What are the points of attention in the selection of materials for clean room decoration? (2)
Home / News Center / What are the points of attention in the selection of materials for clean room decoration? (2)

What are the points of attention in the selection of materials for clean room decoration? (2)

               
Update:2020-11-23 0:00:00
Summary:1. Biological clean rooms such as operating rooms are usually equipped with trioxygen O3 generators for the purpose of sterilization. O3 (i.e. ozone) is a strong oxidizing gas that accelerates the oxidative rust of objects, especially metals, in the ......

1. Biological clean rooms such as operating rooms are usually equipped with trioxygen O3 generators for the purpose of sterilization. O3 (i.e. ozone) is a strong oxidizing gas that accelerates the oxidative rust of objects, especially metals, in the environment, and also causes the general coating surface to fade and change color due to oxidation. Therefore, this kind of dust-free workshop requires that its decoration materials have good oxidation resistance and will not produce rust.
2. Floor: Generally use 2mm/3mm epoxy floor or PVC floor. The material of the floor depends on different industries and areas.
A. Epoxy floor: the larger the area, the higher the probability of using epoxy floor. Advantages: Epoxy floor wear-resistant. Disadvantages: repair will have color difference and long construction period.
B. PVC floor: PVC is mostly used for small area. Advantages: fast construction period, easy to repair; disadvantages: because PVC has splicing seams, it is easy to accumulate dust. The return air duct is made of hot-dip zinc plate, and the fire-retardant PF foamed plastic plate with good purification and insulation effect is used. The high-efficiency air outlet should use a stainless steel frame, which is beautiful and clean. Dust should be cleaned. On the one hand, the clean room design and decoration should pay attention to the moisture content of the wood used should not be greater than 16%, and should not be exposed for use. Due to the large number of air changes in the clean room and low relative humidity, if a large amount of wood is used, it is easy to dry, crack, change, loose, and generate dust. Even if it is used, it must be used locally and must be treated with anti-corrosion and moisture-proof treatment.

Hand made PU panel

Hand made PU panel

Adopts good quality PCGI surface sheet with PU as......

Clean Room For Pharmaceutical Industry

Clean Room For Pharmaceutical Industry

Clean Room For Pharmaceutical Industry       Pha......

Hand made rock wool sandwich panel

Hand made rock wool sandwich panel

Adopts good quality PCGI surface sheet with rock ......

Top supplier Auxiliary aluminum profile

Top supplier Auxiliary aluminum profile

Purification aluminum profile is the accessory to......

Hand made aluminum honeycomb sandwich panel with double layer magnesium oxide boards

Hand made aluminum honeycomb sandwich panel with double layer magnesium oxide boards

Adopts good quality PCGI surface sheet with alumi......

Hand made paper honeycomb sand- wich panel with double layer magne-sium oxide boards

Hand made paper honeycomb sand- wich panel with double layer magne-sium oxide boards

Adopts good quality PCGI surface sheet with paper......